300T 6-Motor G654E Trunk Fusion Splicer

300T 6-Motor G654E Trunk Fusion Splicer

$1,471.00
$1,471.00
Skip to product information
300T 6-Motor G654E Trunk Fusion Splicer
  • 300T 6-Motor G654E Trunk Fusion Splicer
  • 300T 6-Motor G654E Trunk Fusion Splicer
  • 300T 6-Motor G654E Trunk Fusion Splicer
  • 300T 6-Motor G654E Trunk Fusion Splicer
  • 300T 6-Motor G654E Trunk Fusion Splicer
300T 6-Motor G654E Trunk Fusion Splicer

300T 6-Motor G654E Trunk Fusion Splicer

$1,471.00
$1,471.00

All-Metal construction 

6-Motor, core alignment 

G654E fiber compatible 

3D surround dual heating slots 10s heating (fast mode) 

Tool-Less disassembly SOC holder 

9000mAh Li-ion battery 500 splice+heat cycles per charge
Manufacturing

JILONG
Product Manual

300T Trunk Fusion Splicer

300T 6-Motor G654E Trunk Fusion Splicer

All-Metal construction

6-Motor, core alignment

G654E fiber compatible

3D surround dual heating slots 10s heating (fast mode)

Tool-Less disassembly SOC holder

9000mAh Li-ion battery 500 splice+heat cycles per charge

300T 6-Motor G654E Trunk Fusion Splicer

Discover how the 300T can improve the efficiency of fused fiber

3D surround dual heating slots

10s heating (fast mode).
Splice in 6s. Work at Double Pace

Dual-Layer Cooling Slot

Say goodbye to single-layer congestion! The dual cooling tray offers 2x loading capacity, doubling fusion efficiency.

Product Specifications

Key specifications at a glance—defining quality and performance through data.
Model Core Alignment
Applicable Fibers SM(TTU-T G.652&G.657)/ MM(ITU-T G.651)/CS(ITU-T G.654)/DS(TU-T G.653)/ NZDS(TU-T G.655)
Compatible Fiber/Cable 0.25~3.0mm/Drop Cable
Fiber Holder Replaceable Universal Holder
Fiber Diameter Cladding: 80-150μm，Coating: 100~1000μm
Fiber Cleave Length 8~16 mm
Splice mode Max 128 groups
Typical Splice Loss SM:0.02dB/MM:0.01dB/CS:0.03dB/DS:0.04dB/NZDS:0.04dB/G.657:0.02dB ★①
Return Loss >>60dB
Splicing Time 6s(SM G652 QuickMode)
Estimated Splice Loss : Available
Heating Time 10s(SM G652 250μm 40mm heat shrink tubing Fast mode)user adjustable
Protection Sleeve Length 20mm, 30mm, 40mm, 50mm, 60mm
Heat Programs Max 32 groups
Battery 9000mAh Lithium battery, approx. 500 splice & heat cycles per charge ★②
Electrode Life Approx. 5000 discharges ★③
Auto-start Splice / Heating
Automatic Fiber Identification Supported
Automatic ARC Identification Automatic calibration based on ambient temperature and air pressure
Results Storage 10,000 splice records or 2,000 splice images
Tension Test 1.96~2.25N
Operating Condition Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s
Storage Condition 0~95% relative humidity, -20~60°C
Display 5.0 inch High-definition LCD display
Fiber Magnification X, Y, XY, X/Y : 320X Magnification
Power Supply AC Input 100-240V, DC Input 9-14V
Terminal USB2.0
Weight 2.367kg(without battery)/2.9kg(with battery)
Size 167Hx 147Wx 166D mm (including protective case)

★All-Metal Material: Excluding the battery, metal components account for over 65%+ of the weight.
★500 Splice + Heat Cycles on Full Charge: Results obtained in a room temperature environment using 0.25mm fiber and 40mm sleeves; results are largely influenced by battery status and operation.
★Cleaver Workstation: The workstation must be purchased separately.
① Results are tested using standard fibers according to ITU-T and IEC standard truncation methods; loss varies due to environment and fiber characteristics.
② Results obtained in a room temperature environment; largely influenced by battery status and operating environment.
③ Electrode life varies due to environment, fiber types, and splicing modes.

Packing List

Ensuring every core component and accessory arrives in perfect condition.

300T Fusion Splicer Packing List

① Multi-functional Workstation Carrying Case * 1
② Fusion Splicer Main Unit * 1
③ Fiber Cleaver * 1
④ Lithium Battery 9000mAh BTR-90S * 1
⑤ Power Cord / Power Adapter * 1
⑥ Cooling Tray * 1
⑦ Fiber Cleaver Carrying Case * 1
⑧ Alcohol Dispenser Bottle * 1
⑨ Fiber Heat Shrink Sleeves (100 pcs)
⑩ 3-hole Fiber Stripper (2-in-1 Drop Cable Stripper) * 1
⑪ Spare Electrodes Box (Spare Electrodes + Utility Knife + Brush) * 1

300T - Vision in Motion

Experience the power and versatility of the 300T in action

FAQs

Why does the fusion splicer always prompt "Arc Offset" or "Arc Calibration Failed" during discharging?

Common Causes:

Environmental Changes: Significant shifts in air pressure, temperature, or humidity (e.g., moving from indoors to a high-altitude outdoor site).

Electrode Aging: Heavy carbon buildup on the electrodes, or they have reached the end of their lifespan.

Solutions:

Always perform an Arc Calibration whenever you change your working environment or replace the electrodes, allowing the machine to automatically adjust the current.

If the arc calibration fails repeatedly, try cleaning the carbon buildup off the electrodes using a cotton swab dipped in alcohol, or replace them with a new pair.
What causes excessive splice loss?

Troubleshooting Steps:

Poor Cleave Angle: The fiber cleaver blade is worn out or dirty, resulting in burrs or a cleave angle that is too large (greater than 1 degree).

Dirty V-Grooves or Clamps: Microscopic dust particles can cause the fibers to misalign axially.

Mismatched Fiber Types: For example, attempting to splice Single-Mode (SM) with Multi-Mode (MM) fibers.

Solutions:

Clean the fiber and re-cleave it.

Use a specialized brush or an alcohol-swapped cotton bud to clean the V-grooves and objective lenses.

Ensure the current splicing program selected on the machine (e.g., Auto, SM, MM) matches the actual fiber type.
The screen shows a "dark line" or a "bubble" at the splice point. Will this affect performance?

Impact Assessment: Yes, it will severely affect transmission quality. A dark line usually indicates poor alignment or damaged fiber, while bubbles mean air or impurities are trapped inside the splice.

Main Causes:The fiber end-face was not cleaned properly, leaving coating residue, dust, or moisture.The cleave quality was poor, leaving a highly uneven end-face.

Correct Procedure:Strictly follow the "Strip→Clean→Cleave" sequence.Remember, once the fiber is cleaved, its end-face must never touch any surface. Place it directly into the fusion splicer and redo the splice.
What should I do if the heater fails to heat up, or the fiber protection sleeve does not shrink completely?

Troubleshooting Steps:

Check Heating Parameters: Confirm that the selected heating mode matches the length of the protection sleeve you are using (e.g., 40mm or 60mm).

Check the Heater Lid: Some models require the heater lid to be completely closed to trigger the heating process.

Adjust Heating Time: In cold or low-temperature environments, the default heating time might be insufficient. You can manually extend the heating time or increase the heating temperature in the settings.
How should I maintain and care for the fusion splicer daily?

Three Golden Rules of Maintenance:

Keep it Clean (Most Important): After every job, use a blower brush to remove fiber shards and dust from the fiber clamps, V-grooves, and mirrors. Periodically clean the objective lenses gently with a slightly moistened alcohol swab.

Electrode Management: Electrodes typically have a lifespan of 3,000 to 5,000 arcs. Replace them promptly once the arc count reaches its limit or if the tips show severe oxidation.

Battery Care: If the device will not be used for a long time, charge the lithium battery to about 50%–70%, remove it, and store it separately. Recharge and discharge it every 2 to 3 months to prolong its lifespan.

You may also like